Table of Contents
Advertisement
View Arming Task
Go to VCA → Intell Traffic Event → Vehicle Arming → Arming Status to view the arming tasks sent
from the platform.
The device performs a single task at one time. If it receives multiple tasks, former tasks are
interrupted and the device performs the latest task.
3.5.9 Advanced Settings
You can set the advanced settings according to your need to get better vehicle arming effect.
Advanced Parameters
Go to Configuration → Vehicle Arming → Advanced Configuration → Advance Parameters to set
the following parameters.
License Plate Thumbnail
If the device recognizes a license plate, an additional thumbnail of the license plate is uploaded.
Tuning Mode
The tuning mode is for professional technicians. It is not recommended to other users as it may
affect the live view image.
Capture No Plate Vehicle
When this function is enabled, the device captures and uploads vehicle pictures with or without
license plate. If it is not enabled, only pictures of vehicles with license plate are uploaded.
Dwell Time after Failed Tracking
The time the device stays at the position where the target tracking fails.
Report Interval of Tracking Info
The alarming information upload interval during tracking.
Wait to Stop Tracking If Low Validity
The validity is an internal parameter that helps judge whether the device should keep tracking
or not. This parameter is the waiting time level before the device stops tracking when the
validity is low. Larger value means longer waiting time.
Wait to Lower Tracking Speed If Low Validity
The validity is an internal parameter that helps judge whether the PTZ channel should lower the
tracking speed or not. This parameter is the waiting time level before the device lowers the
tracking speed when the validity is low. Larger value means longer waiting time.
Self-adaptive Ratio Coefficient
TandemVu PTZ Camera User Manual
38
Advertisement
Table of Contents
