Connect The Printer Using An Ieee 1284 Cable; How To Connect The Printer To Your Network; Connect The Printer To An Ethernet Network - Intermec PM23c User Manual

Connect the Printer Using an IEEE 1284 Cable

How to Connect the Printer to Your Network

Connect the Printer to an Ethernet Network

PM23c, PM43, and PM43c Mid-Range Printer User Manual
You can connect the printer to your PC using an IEEE 1284 cable if you
have the parallel port option installed in your printer.
Note: You must configure all printer settings through the printer
Main Menu, the printer web page, or with PrintSet 5 and a USB
connection before you use the parallel connection to the printer.
1 Connect one end of the IEEE 1284 cable to the interface adapter
port on the back of the printer.
2 Connect the other end of the cable to to parallel port on the PC.
You can connect the printer to your network using the:
• Ethernet interface.
• Wi-Fi + Bluetooth wireless interface.
These network interfaces provide features such as security, FTP server,
web page, and Alert handling.
Use the Ethernet port to set up the PM43 or PM43c as a network
printer. The printer is set to automatically retrieve an IP number from
the network (DHCP) when you turn on the printer. You can use the
network connection with InterDriver. You can also use it to directly
send commands to the printer through a terminal connection
(Telnet), or you can send instructions through FTP.
1 Turn the printer off.
2 Connect the Ethernet cable to the Ethernet port in the rear of the
printer and connect the other end of the cable to your network.
Chapter 3 — Connect the Printer
49