Configuring The Printer Using Esim Commands - Intermec PF8d User Manual

Chapter 2 — Connecting the Printer

Configuring the Printer Using ESim Commands

46
To view the printer's home page
1 Navigate to and download the EasyLan Control Center tool from
the PrinterCompanion CD.
2 Start EasyLan Control Center. All the printers that are connected
to your network are listed in the tool. For help connecting your
printer to the network, see
Network" on page
3 Right-click on the printer you want to configure and select Go to
Homepage. The home page of the printer appears.
1 Using HyperTerminal, establish communication between the
printer and your PC. For help, see
Through the Serial Port" on page 37
printer to the Ethernet network" on page
2 In the HyperTerminal window, type a network configuration
command and press Enter. For example, using ESim commands
you can:
• Set the IP address.
• Set the Gateway.
• Set the Nameserver.
For a list of network configuration commands, see
PC4, PF8, PD41, and PD42 Printer Programmer's Reference
Manual.
3 In they HyperTerminal window, type UQ and press Enter. The list
of network configurations set for the printer will display in the
window.
"Connecting the Printer to Your
40.
"Connecting the Printer
PF8d and PF8t Desktop Printer User's Guide
or "To connect your
40.
ESim for the