Configuring Snmp Settings - Intermec PM4i User Manual

Chapter 3 — Configuring the Printer
70
Use the following table to understand the mail settings.
Understanding the Mail Settings
Setting
Mail (SMTP)
Server
Mail addresses

Configuring SNMP Settings

Use the SNMP page to view and change SNMP settings.
To configure SNMP settings
1 Click Network Admin > SNMP.
2 Change the SNMP settings.
3 Click Add to add trap settings. You can define up to four
authentication failure traps.
After you add a trap, it appears in the Trap Address Settings list.
You can edit or delete each trap in the list by clicking Edit or
Delete.
4 Click Submit SNMP settings.
Description
Choose a configuration method for your mail server
settings:
•
SMTP settings from DHCP: Choose this setting if
you want the printer to receive settings
automatically from your DHCP server. This setting
requires that you choose DHCP and IP Selection in
the TCP/IP section.
•
Manual settings: Choose this option to manually
configure the Mail Server address and port. The
default port is 25.
Defines the e-mail addresses to use when the printer
sends alert messages:
•
From address: The address that displays as the
sender of alert messages. E-mail will be returned to
this address if the recipient is unreachable. To
prevent e-mail bounces when the recipient is
unreachable, leave this field empty.
•
To address: The recipient of alert messages. To
enter several addresses, separate them with a comma
(,) or a semicolon (;).
PM4i Mid-Range Printer User's Manual