Handling The Batteries - Otto Bock 8E38 9 Instructions For Use Manual

9.6 Control mode 6:
With this control mode, a quick and strong signal opens the MyoHand VariPlus Speed, and a
slow, gently signal closes it.
Control
mode 6
Double Quick, strong electrode sig-
Channel nal that reaches the upper
Control threshold within 80 ms and is
maintained above the upper
threshold for at least 30 ms
Adjustment regulator B
The upper threshold (B) can be adjusted using the Ottobock MyoSelect (757T13)
Notice:
(adjustment regulator C).
Display of the MyoSelect (757T13)

10 Handling the Batteries

As soon as the MyoHand VariPlus Speed recognizes a fully charged EnergyPack (757B20,
757B21) or MyoEnergy Integral ( 757B25=* / 757B35=* ), it automatically switches to Li-Ion bat-
tery technology. Once this has happened, the system should only be operated with this battery
technology. If a 757B15 X-ChangePack is employed after the control has switched to Li-Ion bat -
8E38=9, 8E39=9, 8E41=9
Double Channel Control
Control with 1 electrode
OPEN
Adjustment regulator B is used to adjust the speed of the "OPEN-
ING / CLOSING" function and the speed of grip force build-up.
Adjustment regulator C is used to adjust the upper threshold.
Notice: Always check the adjustments on the prosthesis and
adapt them to the amputee.
CLOSE
Slow, gentle electrode signal
that does not reach the up-
per threshold within 80 ms
Grip force:
Duration of the signal
Adjustment regulator B
Indication
For amputees
with one
strong elec-
trode signal
Ottobock | 33