Otto Bock 8E38 9 Instructions For Use Manual page 27

9.2.3 Control with 1 switch
This control mode can be used with any MyoBock switch.
At constant speed, as long as the OPEN-side of the switch is operated.
Opening:
The MyoHand VariPlus Speed remains open.
At constant speed, as long as the CLOSE-side of the switch is operated.
Closing:
Control
mode 2
AutoControl MyoHand VariPlus Speed
LowInput opens as long as the
OPEN-side of the switch is
operated.
Speed: constant
Adjustment regulator A
Display of the MyoSelect (757T13)
8E38=9, 8E39=9, 8E41=9
OPEN
MyoHand VariPlus Speed
closes as long as the
CLOSE-side of the switch
is operated.
Grip force:
Time proportional
Speed: constant
Adjustment regulator B
Adjustment regulator A is used to adjust the constant speed of
the "OPENING" function.
Adjustment regulator B is used to adjust the constant speed of
the "CLOSING" function and the speed of grip force build-up.
Notice: Always check the adjustments on the prosthesis and
adapt them to the amputee.
CLOSE Indication
For amputees with
weak or no elec-
trode signal
Ottobock | 27