Laser Safety Information - Agilent Technologies 8614 B Series User Manual

Optical spectrum analyzer
Table of Contents

Advertisement

Getting Started

Laser Safety Information

Laser Safety Information

• Laser Safety Information
The light sources specified by this user guide are classified according to
IEC 60825-1 (2001). The light sources comply with 21 CFR 1040.10 except for deviations pursu-
ant to Laser Notice No. 50, dated 2001-July-26
Laser type
W avelength
M ax. CW output pow er *
Beam w aist diam eter
Num erical aperture
Laser class according to
IEC 60825-1 (2001)
M ax. perm issible
CW output pow er **
*
M ax. CW output power m eans the highest possible optical CW pow er that the laser source can
produce at its output.
**
M ax. perm issible CW output power is the highest optical power that is perm itted within the
appropriate IEC laser class.
WARNING - Please pay attention to the following laser safety warnings:
• Under no circumstances look into the end of an optical cable attached to the optical output when
the device is operational. The laser radiation can seriously damage your eyesight.
• Do not enable the laser when there is no fiber attached to the optical output connector.
• The use of optical instruments with this product will increase eye hazard.
• Refer servicing only to qualified and authorized personnel.
1-26
Edge em itting LED (EELED)
1310nm
1550 nm
50 µW
9 µm
0.1
1
15,6m W
10m W

Advertisement

Table of Contents
loading

Table of Contents