Table of Contents
Advertisement
Function Reference
Save To (Save Setup Panel)
Save To (Save Setup Panel)
Selects saving data to a floppy disk or to internal memory.
Key Path
Remote Commands
Save Traces (Save Setup Panel)
Selects the traces to be saved. Select Save Traces and then select the individual trace(s) or all the
current trace data.
Key Path
Remote Commands
Scale/Div
Specifies the dB per division of the vertical (that is, amplitude) scale. If Auto is specified in the
Auto Measure Setup panel, the measurement function sets the vertical scale based on the
dynamic range of the signal. If a particular vertical scale is desired, use the step keys or key pad
to enter the desired dB/div in the dB dialog box. The amplitude scale can be set from 0.01 to 20
dB per division. The Preset value is 10 dB per division.
Key Path
Related Functions
Remote Commands
3-72
Save/Recall > Save Menu > Save To
*SAV FLOPpy | INTernal
See "Saving Measurement and Trace Data" on page 2-19
Save/Recall > Save Menu > Save Traces
MMEMory:STORe:TRACe
Amplitude > Scale/Div
Display Mode Log Linear, Reference Level
DISPlay:WINDow:TRACe:Y:SCALe:PDIVision
Advertisement
Table of Contents
