Table of Contents
Advertisement
Figure 6-1. Example of a static-safe workstation
To clean the printer head
Table 6-2. Printer Accessories
1 Turn off the Agilent 86140B series optical spectrum analyzer, and remove the line power cord.
2 Place the instrument at a static-safe work station as described in the introduction to this
procedure.
3 Use a coin or screwdriver to open the printer door that is located on the top of the instrument.
C A U T I O N
Avoid dropping the coin or screwdriver, used to open the printer door, into the printer assembly.
4 Lift up the paper latch as shown in the following diagram, and remove the paper.
Agilent Part Number
9270-1605
Printer Head Cleaning Procedure
Description
Printer Paper
Maintenance
6-5
Advertisement
Table of Contents
