Options
Accesses the Current Source Setup and Light Source Output Setup softkeys.
Current Source Setup panel allows you to set the current limit, enable pulse mode and synchro-
nize the ADC sync output.
Light Source panel turns the desired light source on or off. The number and type of sources dis-
played depends on the options installed.
Key Path
Remote Commands
OSA Extended State Information
Displays the OSA extended state information:
• Align Pos (Internal)
• Align X (Internal)
• Align Y (Internal)
• Amp Corr
• Grat Offset
• Grating Order
• Hi Gain TransZ amplifier stage value
• Line Spacing
• Lo Gain TransZ amplifier stage value
• S1
• Trajectory alignment Data (Internal)
Key Path
See "Current Source Setup" on page 3-18
System > Options
SOURce[n]:STATe
System > More System Functions > Service Menu > Adv Service Functions > More Adv Ser-
vice Menu > Extended State Info
See "Light Source" on page 3-29
Function Reference
Options
3-49