Agilent Technologies 8614 B Series User Manual page 167

Wavelength Cal Info
Displays the date of the last factory calibration, the last user wavelength calibration date, signal
source, wavelengths referenced in, and set calibration wavelength.
Key Path
Related Functions
Remote Commands
Wavelength Cal Setup
See "Calibrating Wavelength Measurements" on page
• calibration data will be offset or replaced
• factory wavelength calibration date
• set calibration wavelength
• signal source external or calibrator
• user wavelength cal date
• wavelength referenced in air or vacuum
The Wavelength Calibration setup panel
Setup Panel Selections Factory Wavelength Cal Date
Shows the date of the last factory-performed wavelength calibration.
System > Calibration > Wavelength Cal Setup
Wavelength > Calibration
CALibrate:WAVelength:DATE?
Function Reference
Wavelength Cal Info
2-13. Accesses the following:
3-93