Agilent Technologies 8614 B Series User Manual page 100

Function Reference
Filter Mode
N o t e During filter mode, the noise marker, delta marker, and OSNR marker are disabled.
Key Path
Remote Commands
Filter Mode
For the Agilent 86146B Filter Mode only.
The filter mode utilizes the 9 µm external optical path to increase dynamic range and resolution
bandwidth with the Agilent 86146B filter mode. An active tuning marker can be selected and
tuned to the wavelength position. The filter marker becomes the current marker and has the
active area focus. All other markers stay on.
page 2-26
Key Path
Remote Commands
Filter Mode Instruction Panels
For the Agilent 86146B Filter Mode only
Allows the choice of disabling the auto align, auto measure, and take sweep setup instructions
when switching from internal to external path.
Key Path
3-26
Appl's > Measurement Modes > Filter Mode > Switch Path Auto Align Now or Switch Path
No Auto Align > Filter Marker Tune
CALCulate[1|2|3|4|5|6]:MARKer:SRLevel
INPut:FILTer:SCENt
INPut:FILTer:SRLevel
for further information. Also
Appl's > Measurement Modes > Filter Mode
INSTrument:SELect "FILTER"
System > More System Functions > Display Setup > Filter Mode Instrument Panels
Refer to "Analyzing Measurement Data" on
see "Time Resolved Chirp" on page 2-34