Table of Contents
Advertisement
Function Reference
TransZ 2-3 Lock
The instrument displays up to six traces: A, B, C, D, E, and F. When the instrument is first turned
on, trace A is the active trace.
TransZ 2-3 Lock
Prohibits the instrument from using a transimpedance gain higher than the
10k ohm stage. The default state for transZ 2-3 lock is off.
Key Path
Remote Commands
Trigger Mode, Internal
Synchronizes the start of the sweep to an internally generated trigger signal. Internal triggering
ensures continuously triggered sweeps with the shortest delay between sweeps.
a Measurement" on page 2-9
Key Path
Remote Commands
Update A...F On|OFF
When on, the selected trace is updated after each sweep. When off, the trace data is not
updated.
Key Path
Related Functions
3-88
Systems> More System Functions > Service Menu > Adv Service Functions > More Adv Ser-
vice Menu > TransZ 2-3 Lock
[SENSe]:POWer:RANGe:LOCK
Bandwidth/Sweep > More BW/Sweep Functions > Trigger Mode
TRIGger[:SEQuence]:SLOPe
TRIGger[:SEQuence]:SOURce
Traces > Update
View A...F
See "Triggering
Advertisement
Table of Contents
