Table of Contents
Advertisement
Using the Instrument
Analyzer Operating Modes
adjusting the marker's position, then connecting the monochromator output to another instru-
ment. If the input spectrum changes, reconnect the monochromator output, then press the Take
Sweep softkey to capture a new sweep.
The single mode filter can be used in conjunction with the Agilent 86130A bitalyzer error perfor-
mance analyzer and/or the Agilent 86100A infinium digital communication analyzer. Time
resolve chirp (TRC) measurements use the Agilent 86146B Option TRC and the Agilent 86100A
digital communication analyzer.
2-30
Advertisement
Table of Contents
