Table of Contents
Advertisement
The settings for sensitivity, video bandwidth and sweep time interact. If the sensitivity is set to
manual, the video bandwidth and sweep time may be forced to Auto mode. If the video band-
width is set to manual, the sensitivity and sweep time may be forced to Auto. If the sweep speed
is set to manual and is set too fast, the over sweep indicator will come on in the display area.
Since these settings interact, it is recommended that only one of the settings be changed, which-
ever setting is most important to the measurement task being performed.
Key Path
Related Functions
Remote Commands
Set Time/Date
Accesses the time/date setup panel. The selections are current time (24-hour format), current
date, and time zone. To make changes:
• use the navigation keys to select the dialog box
• use the numeric entry keys to change the time and date
• use the step keys to change the time zone and month
• press Set Time/Date when the desired changes are completed
Changing the time, date, or time zone causes the instrument to reboot with the current informa-
tion.
Key Path
Set Title
Accesses the Title Setup panel to add a title to the display. Use the softkeys to change or select
the items from the setup panel.
Key Path
Remote Commands
Amplitude > Sensitivity
Amplitude Setup (Auto Ranging), Reference Level
(Automatic) SENSe: POWer:DC:RANGe:LOWer:AUTO
(Manual) SENSe: POWer:DC:RANGe:LOWer
System > More System Functions > Set Time/Date
System > Set Title
DISPlay[:WINDow[1]]:TEXT:DATA
Refer to "Adding a Title to the Display" on page 2-18
Function Reference
Set Time/Date
3-75
Advertisement
Table of Contents
