Table of Contents
Advertisement
Function Reference
Amplitude Units (Amplitude Setup Panel)
Amplitude Correction Sel
Allows you to select a correction set to be applied to the measurement results. Only one set can
be selected at a time. Refer to "Amplitude Correction Remote Commands" on page 1-24 of the
"Agilent 8614xB Series Optical Spectrum Analyzer Programming Guide"
overview of the amplitude correction remote commands.
Amplitude Correction Mode
Allows you to turn the AMPCOR ON or OFF.
When AMPCOR is turned on, the correction points are applied across the active measurement
range and added to all measurement results. Between points, the correction values are interpo-
lated linearly or logarithmically. When measuring at wavelengths outside the first and last correc-
tion points, the first or last value (as appropriate) is used as the correction value.
Whenever AMPCOR is active, the currently selected correction set is displayed in the lower left
corner of the screen. For example, if correction set number one is selected, "A1" is displayed.
Refer to "Amplitude Correction Remote Commands" on page 1-24 of the
Series Optical Spectrum Analyzer Programming Guide"
tude correction remote commands.
Key Path
Related Functions
Remote Commands
Amplitude Units (Amplitude Setup Panel)
Selects the amplitude scale's units. Selecting Auto for amplitude units allows power to be shown
in dB when using the logarithmic scale and in watts when using the linear scale. Selecting W
forces the readout to be in watts, regardless of the amplitude scaling.
Key Path
Related Functions
3-8
Amplitude > Amplitude Setup...
Reference Level, Sensitivity
(Amplitude Display Mode):DISPlay:WINDow:TRACe:Y:SCALe LINear
DISPlay:WINDow:TRACe:Y:SCALe LOGarithmic
(Amplitude Units):UNIT:POWer
(Auto Zero):CALibration:ZERO
(Reference Level Position):DISPlay:WINDow:TRACe:Y:SCALe:RPOSition
Amplitude > Amplitude Setup > Amplitude Units
Display Mode, Trace Marker, Scale/Div
for an
"Agilent 8614xB
for an overview of the ampli-
Advertisement
Table of Contents
