Safety And Regulatory Information; Introduction; Before Applying Power; Connector Care And Cleaning - Agilent Technologies E444 AU Series Installation Manual

E444xAU IF Output Options

Safety and Regulatory Information

Introduction

Review this product and related documentation to familiarize yourself with safety
markings and instructions before you operate the instrument. The documentation contains
information and warnings that must be followed by the user to ensure safe operation and
to maintain the product in a safe condition.

Before Applying Power

Verify that the product is configured to match the available main power source. If this
product is to be powered by autotransformer, make sure the common terminal is connected
to the neutral (grounded) side of the ac power supply.

Connector Care and Cleaning

Cleaning connectors with alcohol shall only be done with the instrument power cord
removed, and in a well ventilated area. Allow all residue alcohol moisture to evaporate and
the fumes to dissipate prior to energizing the instrument.
WARNING Keep isopropyl alcohol away from heat, sparks, and flame. Store in a
tightly closed container. It is extremely flammable. In case of fire, use
alcohol foam, dry chemical, or carbon dioxide; water may be
ineffective.
Use isopropyl alcohol with adequate ventilation and avoid contact with eyes,
skin, and clothing. It causes skin irritation, may cause eye damage, and is
harmful if swallowed or inhaled. It may be harmful if absorbed through the skin.
Wash thoroughly after handling.
In case of spill, soak up the sand or earth. Flush spill area with water. Dispose of
isopropyl alcohol in accordance with all applicable federal, state, and local
environmental regulations.

Declaration of Conformity

For a copy of the manufacturer's Declaration of Conformity for this apparatus, contact your
local Agilent Technologies office or sales representative on

Statement of Compliance

This instrument has been designed and tested in accordance with IEC Publication 1010,
Safety Requirements for Electronic Measuring Apparatus, and has been supplied in a safe
condition. The instruction documentation contains information and warnings which must
be followed by the user to ensure safe operation and to maintain the instrument in a safe
condition.
Installation Guide
E444xAU Options H20, H25 and H70
Safety and Regulatory Information
Page 32.
27