Agilent Technologies 8614 B Series User Manual page 59

Backing Up or Restoring the Internal Memory
1 Press the front-panel Save/Recall key.
2 Press the Backup/Restore Menu.... softkey.
N o t e The auto span value will not be saved with the measurement.
on page
Softkey Panel Selections Backup Internal Memory
a The analyzer Backup Utility screen appears asking you to insert a formatted floppy disk in the
b The Backup Internal Memory function overwrites the floppy disk with a new image. Any exist-
Restore Internal Memory
The analyzer Restore Utility screen appears. This operation will remove all files from internal
memory and replace them with files from backup floppy disks.
Saving Measurement and Trace Data
You can save measurement and trace data using the following methods:
• Fast Measurement Save Mode
• Save Setup Panel Mode
Saving Data in Fast Meas Save Mode
1 Press the front-panel Save/Recall key.
2 Press the Fast Meas SAVE softkey.
3 The instrument saves the current measurement state to internal memory as FASTSAVE.dat. Only
one FASTSAVE.dat file exists, so performing a Fast Meas Save will overwrite any currently existing
Fast Save file.
3-13.
external drive. The disk will not be viewable on a PC and no trace or measurement files can be
saved onto the disk until it is reformatted.
ing files or catalogs on the floppy disk will be destroyed. Any successive backup operations will
overwrite the previous backup information, so only the latest backup information can be recov-
ered through the Restore Internal Memory operation.
Using the Instrument
Saving, Recalling, and Managing Files
Refer to "Backup Internal Memory"
2-19