Table of Contents
Advertisement
Reset Min/Max Hold
Resets trace hold data and returns to the Traces function keys where you can select an active
trace, trace input, update, view, and hold functions.
Key Path
Remote Commands
Restore Internal Memory
Accesses the instrument restore utility. This operation will remove all existing files from internal
memory (that is, measurement, trace, and specification sets) and replace them with files from a
floppy disk. These files are created using the Backup Internal Memory function.
or Restoring the Internal Memory" on page 2-19
Key Path
Revision
Displays the instrument's firmware revision information.
ware Upgrade" on page
Key Path
Remote Commands
Save (Save Setup Panel)
Selects whether all measurement data or only trace data will be saved.
ment and Trace Data" on page
Traces > Hold (trace) > Reset Min/Max Hold
CALCulate[1|2|3|4|5|6]:MAXimum:CLEar
CALCulate[1|2|3|4|5|6]:MINimum:CLEar
CALCulate[1|2|3|4|5|6]:MAXimum:STATe
CALCulate[1|2|3|4|5|6]:MINimum:STATe
Save/Recall > Backup/Restore Menu > Restore Internal Memory
3-27.
System > Help > Revision
*IDN?
See "Help" on page 3-28
2-19.
Function Reference
Reset Min/Max Hold
See "Backing Up
and
"Firm-
See "Saving Measure-
3-67
Advertisement
Table of Contents
