Table of Contents
Advertisement
Using the Instrument
Saving, Recalling, and Managing Files
N o t e
The auto span value will not be saved with the measurement.
Saving Measurement and Trace Data
1 Press the front-panel Save/Recall key.
2 Press the Save Menu.... softkey.
3 The Save Setup panel opens. Refer to
on changing and selecting items in the setup panel.
The Save Setup panel
N o t e
The auto span value will not be saved with the measurement.
Save Setup Panel
Save: Measurement
Selections
Saves the measurement data in a binary format (.dat file). This includes the traces and all mea-
surement conditions. The dat file format can only be read by the analyzer. You will not be able to
view this file on your PC. When the file is recalled, the instrument state will be set to the same
state as when the file was saved.
Save: Trace(s) Only
The Trace(s) Only files are saved in comma separated variable (.csv) format and are auto named
starting with TR_00000.csv. State files are auto named starting with ST_00000.csv.
When the Trace(s) Only file is recalled, the trace data will be displayed under the current instru-
ment settings.To view the instrument settings, press System > More System Functions > State
Info.
Save Traces
Selects the traces to be saved.
2-20
"Adjusting Setup Conditions" on page 2-3
for information
Advertisement
Table of Contents
