Table of Contents
Advertisement
Title (Display Setup Panel)
Turns the display title on or off. When the title selection is on, the title will appear on the display's
top, center of the graticule, and on printouts. Create a title in the Title Setup panel (System > Set
Title). Use the arrows, step keys, or knob to select the letters for the title.
the Display" on page
Key Path
Remote Commands
Trace Averaging
When averaging is on, you can select the number of measurement sweeps to be averaged, using
the 10, 20, 50, 100 softkeys. You can also enter averaging values other than those displayed by
using the numeric keypad or the knob.
When the number of sweeps taken is less than the count, the following formula is used to calcu-
late the data:
AVG = sum of current sweeps/ number of averages selected
If the number of sweeps is greater than or equal to the count, the following formula is used to
calculate the data:
New average = [(count-1)/count] x last average + new measurement/count
Key Path
Remote Commands
Trace C Math Off
Turns off Trace C math processing.
2-18.
System > More System Functions > Display Setup
DISPlay:WINDow:TEXT:DATA
Traces > Averaging
CALCulate[1|2|3|4|5|6]:AVERage:COUNt
CALCulate[1|2|3|4|5|6]:AVERage:STATe
Function Reference
Title (Display Setup Panel)
See "Adding a Title to
3-85
Advertisement
Table of Contents
