Table of Contents
Advertisement
Hold A...F None Min Max (trace)
Hold Max compares the current amplitude value of each point on the active trace in the current
sweep to the corresponding point detected during the previous sweep, then displays the maxi-
mum value.
Hold Min compares the current amplitude value of each point on a trace in the current sweep to
the corresponding point detected during the previous sweep, then displays the minimum value.
Hold None turns the Hold function off.
Key Path
Remote Commands
Integrate Limit
Calculates the power between Wavelength Marker 1 and Wavelength Marker 2 when the trace
integration function is on.
Once wavelength markers have been turned on, the total power integration marker search, and
wavelength sweep may be individually limited to the wavelength marker range.
Key Path
Related Functions
Remote Commands
Light Source
Turns the desired light source on or off. The number and type of sources displayed depends on
the options installed.
Traces > Hold None Min Max
CALCulate[1|2|3|4|5|6]:MAXimum:STATe
CALCulate[1|2|3|4|5|6]:MINimum:STATe
Markers > More Marker Functions > Line Marker Menu > Advanced Line Mkr Functions >
Integrate Limit
Sweep Limit, Search Limit
CALCulate:TPOWer:IRANge:LOWer
CALCulate:TPOWer:IRANge:UPPer
Refer to "Operating the Internal White Light Source" on page 2-4
Function Reference
Hold A...F None Min Max (trace)
3-29
Advertisement
Table of Contents
