Agilent Technologies 8614 B Series User Manual page 116

Function Reference
New GPIB Address (Remote Setup Panel)
New GPIB Address (Remote Setup Panel)
Allows you to enter a new GPIB address. To change the address, use the numeric entry keys, step
keys, or knob. Press the Defaults softkey to reset the address to the factory preset default, 23.
Key Path
Related Functions
Next Peak Down
Places the active marker on the next highest peak down from the current marker amplitude. This
peak must meet the peak excursion and threshold criteria. If the specified marker is off, it will be
turned on and placed at the center wavelength. The search for the next maximum will reference
that point.
Key Path
Remote Commands
Next Peak Left
Places the marker on the next peak located at a lower X-axis value (usually wavelength) than the
current marker position. This peak must meet the peak excursion and threshold criteria. If the
specified marker is off, it will be turned on and placed at the center wavelength or frequency.
Key Path
Remote Commands
3-42
System > More System Functions > GPIB & Network Setup > GPIB Address
Current GPIB Address
Markers > More Marker Functions > Marker Search Menu > Next Peak Down
:CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:MAXimum:NEXT
Markers > More Marker Functions > Marker Search Menu >Next Peak Left
:CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:MAXimum:LEFT