Table of Contents
Advertisement
Key Path
Remote Commands
Peak Search at End of Each Sweep (Marker Setup Panel)
Finds the peak value of the trace and moves the active marker to the peak at the end of each
sweep. This function operates on normal, delta, and bandwidth markers.
Key Path
Remote Commands
Peak to REF LEVEL
Sets the value of the reference level equal to the value of the highest point on the active trace.
Key Path
Related Functions
Remote Commands
Perform Calibration
Performs a power or wavelength calibration after the setup has been specified by the user.
Key Path
Remote Commands
Markers > Peak Search
Markers > More Marker Functions > Marker Search Menu > Search Mode Peak > Peak
Search
CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:MAXimum
Markers > Marker Setup > Peak Search at End of Each Sweep
CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:MAXimum
Amplitude > Peak to REF LEVEL
Reference Level
CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:MAXimum
CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:SRLevel
System > Calibration > Power Cal Setup > Perform Calibration
CALibration:WAVelength:INTernal
Peak Search at End of Each Sweep (Marker Setup Panel)
Function Reference
3-53
Advertisement
Table of Contents
