Agilent Technologies 8614 B Series User Manual page 6

General Safety Considerations
is only a standby switch and is not a LINE switch. Alternatively, an externally installed switch or
circuit breaker (which is readily identifiable and is easily reached by the operator) may be used as
a disconnecting device.
CAUTION Always use the three-prong AC power cord supplied with this instrument. Failure to ensure
adequate earth grounding by not using this cord may cause instrument damage.
CAUTION Do not connect ac power until you have verified the line voltage is correct as described in
Power Requirements" on page
CAUTION This instrument has autoranging line voltage input. Be sure the supply voltage is within the
specified range.
CAUTION The Agilent 8614xB contain a light source classified, according to IEC 60825-1.
CAUTION Use of controls or adjustment or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
vi
1-10. Damage to the equipment could result.
"Line