Agilent Technologies 8614 B Series User Manual page 102

Function Reference
GPIB Address
Key Path
GPIB Address
Accesses the GPIB address information. To change the address, use the numerical entry keys,
step keys, or knob to enter the new GPIB address information. If changes are made, press the
Select softkey. Press the Defaults softkey to reset the address to the factory preset default, 23.
Key Path
GPIB & Network Setup
Accesses the functions used to set up networked file and printer shares on the analyzer.
• GPIB Address
• Configure Network
• User Share Identity
• File Shares
• Printer Shares
Key Path
Help
Accesses error queues for: hardware errors, critical errors, notices, and warnings once an error
queue is accessed. Also displays the instrument's current firmware revision.
Upgrade" on page
the information. If no hardware errors, critical errors, notices, or warnings have been generated,
these functions will be shaded.
Key Path
Remote Commands
3-28
Save/Recall > Format Floppy Disk
System > More System Functions > GPIB Address & Network Setup > GPIB Address
System> More System Functions > GPIB Address & Network Setup
3-27You can print the queue, clear the queue, or page up and down to view
System > Help
SYSTem:ERRor?
*IDN?
Refer to "Firmware