Table of Contents
Advertisement
Status Listings
OSA Errors
OSA Errors
Table 5-9. OSA Errors (1 of 2)
Error Number
Error Description [description/explanation/examples]
20001
desc = "Error detected in ADC sub-system"
help = "An error has been detected in the Analog-to-Digital converter subsystem.
Please record the hexadecimal number listed with the error and cycle power. If the
error persists, contact the nearest Agilent Technologies Instrument support center
for assistance. In the U.S., call (800) 403-0801. See the Agilent 86140B Series
Users Guide for a listing of the Agilent sales and service offices."
20002
desc = "Error detected in slit positioning system"
help = "An error has been detected in the motor which controls the resolution
bandwidth slit wheel. Please record the hexadecimal number listed with the error
and cycle power. If the error persists, contact the nearest Agilent Technologies
Instrument support center for assistance. In the U.S., call (800) 403- 0801. See the
Agilent 86140B Series Users Guide for a listing of the Agilent sales and service
offices."
20003
desc = "Error detected in grating positioning system"
help = "An error has been detected in the motor which controls the diffraction
grating. Please record the hexadecimal number listed with the error and cycle
power. If the error persists, contact the nearest Agilent Technologies Instrument
support center for assistance. In the U.S., call (800) 403-0801. See the
Agilent 86140B Series Users Guide for a listing of the Agilent sales and service
offices."
20004
desc = "Monochromator calibration data is invalid"
help = "Factory calibration data for the monochromator is invalid. Please record the
hexadecimal number listed with the error and cycle power. If the error persists,
contact the nearest Agilent Technologies Instrument support center for assistance.
In the U.S., call (800) 403-0801. See the Agilent 86140B Series Users Guide for a
listing of the Agilent sales and service offices."
5-36
Advertisement
Table of Contents
