Table of Contents
Advertisement
Function Reference
Marker Search Menu
Marker Search Menu
Accesses the following marker peak and pit search functions:
• peak or pit search mode
• peak or pit search
• next peak down, left or right
• next pit up, left or right
• active markers
The active markers can also be turned on or off from this menu, which avoids returning to the
Marker menu to change markers.
Key Path
Marker Search Threshold Value (Marker Setup Panel)
Sets the amplitude threshold value used for limiting the marker search function. Any peaks below
the threshold value will be ignored. When the Marker Search Threshold is on, a dotted line is
shown on the display at the threshold level. The Use Marker Search Threshold function in the
Marker Setup Panel must be enabled or the Marker Search Threshold Value will be greyed out.
Key Path
Related Functions
Remote Commands
3-34
Markers > More Marker Functions > Marker Search Menu
Markers > Marker Setup > Marker Search Threshold Value
Pit Excursion, Peak Excursion, Marker Search Threshold
CALCulate:THReshold
CALCulate:THReshold:STATe
Advertisement
Table of Contents
