Using The Remote Front Panel - Agilent Technologies 8614 B Series User Manual

Remote Front Panel Operation
Remote Front Panel

Using the Remote Front Panel

1 In the Map Display window, a Welcome screen is displayed and you are given three command
choices,
• Display accesses a diagnostic tool to show the display parameter setup
• Enable accesses the remote front panel. This command is used to stop the OSA from operating
• Disable turns the remote front panel off. The remote front panel will close on the PC display
A fourth command (which is not displayed) is Passwd.
• Passwd allows you to change the default password to one that is unique for you. It is recom-
N o t e Once you changed the password, you will need to remember it for future use. You will not be able
to access the remote front panel capabilities without the new password.
2 From the command prompt, type Enable. The remote front panel command will be displayed on
the OSA and the OSA will be restarted. You will be able to monitor the restarting process on the
PC display. Once the OSA has finished restarting, the front panel will be activated on your PC
display.
4-14
in normal mode and start operating in the Remote Front Panel mode. The annotation, "Remote
Front Panel On" will be displayed on the hardware OSA display.
and the OSA will restart and return and to normal mode.
mended that you change the default password (osaosa1) at this time. Simply type Passwd at
the prompt and enter a new password. The new password must differ from the old password
by at least three characters.