Agilent Technologies 8614 B Series User Manual page 92

Function Reference
Center Wavelength Step Size (Wavelength Setup Panel)
Center Wavelength Step Size (Wavelength Setup Panel)
Specifies the center wavelength step size. This is used for incrementing center wavelength using
the ¦ and Ø keys.
Key Path
Remote Commands
Configure Network
Starts a utility that allows you to enable and configure networking. Enter this menu only if you
have all the necessary networking parameters.
work" on page 2-25
Key Path
Current GPIB Address (Remote Setup Panel)
Displays the GPIB address currently being used. To change the address, use the numeric keys,
step keys, or knob to enter the new GPIB address information in the Remote Setup panel.
Key Path System > More System Functions > GPIB & Network Setup > GPIB Address
Current Source Setup
Accesses the Current Source Setup panel that allows you to turn on or off the current source, set
the current limit, enable pulse width, duty ratio, and synchronize the ADC sync output.
"Operating the Internal White Light Source" on page 2-4
Key Path
Related Functions
3-18
Wavelength > Wavelength Setup > Center Wavelength Step Size
SENSe:WAVelength:CENTer:STEP:INCRement
System > More System Functions > GPIB & Network Setup > Configure Network
System > Options > Current Source Setup
ADC sync, current limit, pulse width, duty ratio
Refer to "File Sharing and Printing over a Net-
Refer to