Table of Contents
Advertisement
Search Limit On/Off
When the search limit function is on, all the marker peak/pit searches will apply only to the range
specified by the two wavelength line markers.
Key Path
Remote Commands
Search Mode Peak/Pit
Allows you to select between peak and pit search modes. The selection on the marker search
menu will change depending on which of the two modes is selected.
Key Path
Remote Commands
Markers > More Marker Functions > Line Marker Menu > Advanced Line Mkr Functions >
Search Limit On/Off
CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:SRANge:STATe
Markers > More Marker Functions > Marker Search Menu > Search Mode
CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:MAXimum
CALCulate[1|2|3|4|5|6]:MARKer[1|2|3|4]:MINimum
Function Reference
Search Limit On/Off
3-73
Advertisement
Table of Contents
