Table of Contents
Advertisement
Laser Safety Information
Table 10
WARN IN G
Agilent 86122A Multi-Wavelength Meter, Second Edition
Laser Safety Information
The light sources specified by this user guide are classified according to
IEC 60825-1 (2001).
The light sources comply with 21 CFR 1040.10 except for deviations
pursuant to Laser Notice No. 50, dated 2001-July-26
Laser type
Wavelength
Max. CW output power *
Beam waist diameter
Numerical aperture
Laser class according to IEC 60825-1 (2001)
Max. permissible CW output power **
* Max. CW output power means the
highest possible optical CW power that the laser source can produce at its output
** Max. permissable CW output power is the highest optical power that is permitted within the
appropriate IEC laser class.
WARNING - Please pay attention to the following laser safety
warnings:
• Under no circumstances look into the end of an optical calbe attached to the op-
tical output when the operational. The laser radiation can seriously damage
your eyesight.
• Do not enable the laser when there is no fiber attached to the optical output
connector.
• Pressing the "acitve" button enables the laser. The laser is on when the green-
LED is lit.
• The use of optical instruments with this product will increase eye hazard.
• Refer servicing only to qualified and authorized personnel.
Specifications and Regulatory Information
LED
1270-1650 nm
1 nW
10 µm
0.1
1
10 mW
107
Advertisement
Table of Contents
