Table of Contents
Advertisement
traces must be obtained using identical wavelength, scale and amplitude values. Any difference
in reference level, amplitude units-per-division, or amplitude units invalidates any data resulting
from trace math.
The following functions can be accessed:
• All Math Off
• Default Math Trace C
• Default Math Trace F
• Exchange Menu
• Trace A Offset
Key Path
Remote Commands
Trace OffSet
Offsets the active trace by the user-specified value.
Key Path
Traces
Accesses the menu that allows you to select and control traces. Some of the functions available
are:
• active trace
• averaging
• hold trace
• trace input
• trace math
• trace setup
• update trace
• view trace
See "Using Trace Math to Measure Wavelength Drift" on page 2-28
Traces > Trace Math Off
CALCulate[1|2|3|4|5|6]:MATH:STATe
CALCulate[1|2|3|4|5|6]:MATH:EXPRession:DEFine
TRACe:EXCHange
Traces > Trace Math Off > Remote Commands
CALCulate[1|2|3|4|5|6]:OFFSet
Function Reference
Trace OffSet
3-87
Advertisement
Table of Contents
