Table of Contents
Advertisement
Function Reference
View (trace)
The range of video bandwidths available in auto mode is much greater than can be set manually
from the front panel. A lower video bandwidth value requires a longer sweep time. Because of
the interdependence between the video bandwidth and sensitivity, it is recommended that either
the sensitivity or the video bandwidth be changed, whichever is the most important to the mea-
surement task being performed.
Key Path
Related Functions
Remote Commands
View (trace)
Allows trace A, B, C, D, E, or F data to be viewed. Viewed traces are not updated as sweeps
occur unless the Update function is on.
Key Path
Related Functions
Remote Commands
Wavelength
Accesses a menu to set:
• center wavelength
• peak to center
• span
• start wavelength
• stop wavelength
• wavelength setup
3-92
Bandwidth/Sweep > Video BW
Sensitivity
[SENSe]:BANDwidth|BWIDth:VIDeo:AUTO
[SENSe]:BANDwidth|BWIDth:VIDeo
Traces > View
Active Trace, Update
DISPlay:WINDow:TRACe TRA|TRB|TRC|TRD|TRE|TRF,ON
Advertisement
Table of Contents
