Configuring Video Features - Matrix SPARSH VP710 User Manual

CHAPTER 12
The SPARSH VP710 supports transmission and reception of high quality video images. The video is compatible
with:
RFC 3984 - RTP Payload Format for H.264 Video
RFC 7741 - RTP Payload Format for VP8 Video
This chapter provides information for making configuration changes for the following video-related features:
• Video Settings
• Video Codecs
Video Settings
The IP phone supports USB camera for point-to-point video calls. You can place and answer video calls.
The IP phone supports transmission and reception of high quality video images. You can adjust the camera flicker
frequency according to the power source. The light is powered by 50Hz or 60Hz.
Toggle Between Audio-only or Video Calls
When you disable the video call feature, the calls are audio–only.By default, this feature is enabled.
Procedure
Video settings can be configured using the configuration files or locally.
Configuration File
Local
Matrix SPARSH VP710 User Guide

Configuring Video Features

<MAC>.cfg
Web User Interface
Configure video settings .
For more information, refer
"Appendix D - Configuration
Parameters".
Configure the video settings.
Navigate to:
http://<phoneIPAddress>/servlet?m
=mod_data&p=settings-camera&q
=load
687