Table of Contents
Advertisement
Range
Example
Parameter-
multicast.receive_priority.priority
Description
Default Value
Range
Example
Action URL
Parameter-
action_url.setup_completed
830
0-Disabled
1-Enabled
multicast.receive_priority.enable= 1
Configuration File
<MAC>.cfg
Configures the priority of the voice/video call (a
normal phone call rather than a multicast paging
call) in progress.
1 is the highest priority, 31 is the lowest priority.
0-Disabled
1-1
2-2
3-3
...
31-31
If it is set to 0 (Disabled), all incoming multicast
paging calls will be automatically ignored when a
voice/video call is in progress.
If it is not set to 0 (Disabled), the IP phone will
receive the incoming multicast paging call with a
higher or same priority than this value and ignore
that with a lower priority than this value when a
voice/video call is in progress.
31
Integer from 0 to 31
multicast.receive_priority.priority=31
Configuration File
<MAC>.cfg
Matrix SPARSH VP710 User Guide
Advertisement
Table of Contents
