Table of Contents
Advertisement
•
When the second party answers the call, tap the Conference soft key to add the second party to the
conference.
•
Tap the Conference soft key to place a new call.The conference call is placed on hold.
•
Repeat the preceding three steps until you have added all intended parties.
The procedures to set up a network conference call for specific servers may be different from introduced
above.
Transfer on Conference Hang Up
Transfer on conference hang up feature allows the other two parties to remain connected when the conference
initiator drops the conference call
In a local conference, the calls of all the parties are dropped, when the conference initiator drops the call.
Network conference does not have a conference initiator, so if any party exits the network conference, the
remaining parties are still connected.For more information on network conference, refer to
Procedure
Transfer on conference hang up can be configured using the configuration files or locally.
Configuration File
Local
To configure Transfer on conference hang up via web user interface:
•
Click on Features->Transfer.
436
<MAC>.cfg
Web User Interface
Configure the transfer on conference
hang up.
For more information, refer
D - Configuration
Parameters".
Configure the transfer on conference
hang up.
Navigate to:
http://<phoneIPAddress>/servlet?m
=mod_data&p=features-transfer&q
=load
Matrix SPARSH VP710 User Guide
"Network
Conference".
"Appendix
Advertisement
Table of Contents
