Matrix SPARSH VP710 User Manual page 406

You can configure a programmable key as directed pickup key via web user interface only. Relevant
instructions to do that have been mentioned above. You can pick up a call by pressing the directed pickup
key directly.
Group Call Pickup
Group call pickup is used for picking up a call that is ringing at any phone in the group. The pickup group should be
predefined.If the group receives many incoming calls at once, you can pick up the first incoming call, using a group
pickup key or the GPickup soft key For more information on how to configure DSS Key for group call pickup, refer
"DSS Keys".
This feature depends on support from a SIP server. For many SIP servers, group call pickup requires a group
pickup code, which can be configured on a phone.
• If there are many incoming calls at the same time, tapping the GPickup soft key on the phone will pick
up the call that rings first.
• The pickup group should be predefined, contact your system administrator for more information.
Procedure
Group call pickup can be configured using the configuration files or locally.
Configuration File
398
<MAC>.cfg
Configure the group call pickup
code on a per-line basis.
Configure group call pickup feature
on a phone basis.
Assign a group call pickup key.
For more information, refer
"Appendix D - Configuration
Parameters".
Matrix SPARSH VP710 User Guide