Matrix SPARSH VP710 User Manual page 940

Example
Parameter-
dialplan.block_out.line_id.X
(X ranges from 1 to 10)
Description
Default Value
Range
Example
Live Dialpad
Parameter-
phone_setting.predial_autodial
Description
Default Value
Range
Example
932
dialplan.block_out.number.1 = 4321
When you dial the number "4321" on your phone, the
dialing will fail and the touch screen will prompt
"Forbidden Number".
Note: It works only if the values of the parameters
"dialplan.digitmap.enable" and
"account.X.dialplan.digitmap.enable" are set to 0
(Disabled).
Configuration File
<MAC>.cfg
Configures the desired line to apply the block out rule.
The digit 0 stands for all lines. If it is left blank, the block
out rule will apply to all lines on the IP phone.
Blank
0, Integer from 1 to 16
dialplan.block_out.line_id.1 = 1,2,3
Note: Multiple line IDs are separated by commas. It
works only if the values of the parameters
"dialplan.digitmap.enable" and
"account.X.dialplan.digitmap.enable" are set to 0
(Disabled).
Configuration File
<MAC>.cfg
Enables or disables the live dialpad feature.
0
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the IP phone will automatically
dial out the entered phone number on the dialing
screen without pressing a send key.
NA
Matrix SPARSH VP710 User Guide