Table of Contents
Advertisement
Live dialpad is configurable via web user interface only.
Hotline
You can dial a hotline number immediately upon lifting the handset or pressing the Speakerphone key. You can
also configure a delay, where the phone will dial out the hotline number automatically after the specified period of
time.
Procedure
Hotline can be configured using the configuration files or locally.
Configuration File
Local
To configure hotline via web user interface:
•
Click on Features->General Information.
•
Enter the hotline number in the Hotline Number field.
226
<MAC>.cfg
Web User Interface
Phone User Interface
Configure the hotline number.
Specify the time (in seconds) the IP
phone waits before automatically
dialing out the hotline number.
For more information, refer
D - Configuration
Parameters".
Configure the hotline number.
Specify the time (in seconds) the IP
phone waits before automatically dial
out the hotline number.
Navigate to:
http://<phoneIPAddress>/servlet?m
=mod_data&p=features-general&q=
load
Configure the hotline number.
Specify the time (in seconds) the IP
phone waits before automatically
dialing out the hotline number.
Matrix SPARSH VP710 User Guide
"Appendix
Advertisement
Table of Contents
