Matrix SPARSH VP710 User Manual page 36

Smart video ip deskphone

Hide thumbs Also See for SPARSH VP710:

Table of Contents

Select Standard SIP, to operate the IP Phone in the standard mode. As soon as you select this mode, the

booting process initiates again and the start up screen displays "Welcome Initializing...please wait". After

initialisation of the phone, the touch screen displays the following:

Time and date

Android Keys

Select Extended SIP, to operate the IP Phone in the extended mode. To know more, refer to the

EXTENDED SPARSH VP710 User Guide.

Tap Settings->Status to check the IP phone status, the touch screen displays the valid IP address, MAC

address, firmware version, etc.

If the IP phone has successfully passed through these steps, it starts up properly and is ready for use.

Matrix SPARSH VP710 supports two phone modes, Standard SIP and Extended SIP. You can use the IP Phone

in either of the two modes as per your requirement. This section explains how to switch the phone mode from

Standard SIP to Extended SIP or vice versa.

To change the Phone Mode

Swipe down from the top of the touch screen of the IP Phone.

In Advanced, enter the default password, admin.

Tap Phone Mode

Matrix SPARSH VP710 User Guide