Table of Contents
Advertisement
Range
Example
Parameter-
features.dtmf.hide_delay
Description
Default Value
Range
Example
Transfer via DTMF
Parameter-
features.dtmf.replace_tran
Description
Default Value
Range
810
0 or 1
0 - Disabled
1 - Enabled
features.dtmf.hide = 0
Configuration File
<MAC>.cfg
Enables or disables the IP phone to display the DTMF
digits for a short period before displaying asterisks
during an active call.
Note: It works only if the value of the parameter
"features.dtmf.hide" is set to 1 (Enabled).
0
0 or 1
0 - Disabled
1 - Enabled
features.dtmf.hide_delay = 0
Configuration File
<MAC>.cfg
Enables or disables the IP phone to send DTMF
sequences for transfer function when tapping the
Transfer soft key or pressing TRANSFER/TRAN key.
If it is set to 0 (Disabled), the IP phone will perform
the transfer as normal when tapping the Transfer soft
key or pressing TRANSFER/TRAN key during a call.
If it is set to 1 (Enabled), the IP phone will transmit the
designated DTMF digits to the server for performing
call transfer when tapping the Transfer soft key or
pressing TRANSFER/TRAN key during a call.
0
0 or 1
0 - Disabled
1 - Enabled
Matrix SPARSH VP710 User Guide
Advertisement
Table of Contents
