Table of Contents
Advertisement
The phone will prompt a dialog box.
•
Tap Send to dial out. (The call will automatically dial out in about 5 seconds if you do not tap Send.)
OR
•
Tap
and then tap Local Directory or Remote Phone Book to search the desired contact.
•
Tap the desired contact to dial out.For more information refer to
OR
•
Tap
and then tap the desired list.
•
Tap the desired entry to dial out.
•
Press
or tap the Transfer soft key to complete the transfer when receiving ringback.
If you are using a handset, the transfer can be completed by hanging up the handset.
Attended Transfer
Before performing an attended transfer (except you use dial number method), make sure that the transfer mode via
Dsskey is configured as New Call or Attended Transfer. For more information on how to configure it, refer to
"Transfer Mode via Dsskey".
To perform an attended transfer:
•
Press
or tap the Transfer soft key during a call.
•
Do one of the following:
•
Enter the number you want to transfer the call to.
•
Press
OR
•
Enter the number you want to transfer the call to.
•
Tap Transfer soft key.
The phone will prompt a dialog box.
•
Tap Send to dial out. (The call will automatically dial out in about 5 seconds if you do not tap Send.)
OR
•
Tap
and then tap Local Directory or Remote Phone Book to search the desired contact.
•
Tap the desired contact to dial out.For more information refer to
Matrix SPARSH VP710 User Guide
to dial out.
"Remote Phone Book"
"Remote Phone Book"
421
Advertisement
Table of Contents
