Table of Contents
Advertisement
Example
RTCP-XR
Parameter-
voice.rtcp_xr.enable
Description
Default Value
Range
Example
Parameter-
phone_setting.rtcp_xr_report.enabl
e
Description
Default Value
Matrix SPARSH VP710 User Guide
account.1.video.h264.priority = 2
account.1.video.h264hp.priority = 1
account.1.video.vp8.priority = 3
Note: The name of video codec in this parameter
should be the correct one as listed in the above
example, otherwise the corresponding configuration
will not take effect.
Configuration File
<MAC>.cfg
Enables or disables the IP phone to send RTCP-XR
packets.
0
0-Disabled
1-Enabled
Note: If you change this parameter, the IP phone will
reboot to make the change take effect.
If it is set to 1 (Enabled), video is sent in outgoing calls
and received in incoming calls.
NA
Configuration File
<MAC>.cfg
Enables or disables the IP phone to periodically (every
5 seconds) send RTCP-XR packets to another
participating phone during a call for call quality
monitoring and diagnosing.
0
957
Advertisement
Table of Contents
