Message - Matrix SPARSH VP710 User Manual

Message

Message service in the IP phone can be categorized as follows:
• Video/Voice Mail
• Message Waiting Indicator (MWI)
Video/Voice Mail
You can leave video/ voice mails using SPARSH VP710. You can also access video/voice mails that are stored in
the voice mailbox. The usage of video mail is the same as that of voice mail.
Video/voice mail is not available on all servers and differs from different servers. Contact your system
administrator for more information.
Leaving Voice Mails
To leave a voice mail:
• You can leave a voice mail when the callee is busy or inconvenient to answer the call.
• Follow the voice prompt from the system server to leave a voice mail and then hang up.
Configuring the Voice Mail Access Codes
To configure voice mail access codes via phone user interface:
• Swipe left or right to go to the second idle screen.
• Tap to launch Message application.
• Tap Set Voice Mail.
• Enter the voice mail access code (e.g., *88) in the desired account field.
•
Tap to save the change or
Matrix SPARSH VP710 User Guide
to cancel.
469