Tr-069 Device Management - Matrix SPARSH VP710 User Manual

TR-069 Device Management

TR-069 is a technical specification defined by the Broadband Forum, which defines a mechanism that
encompasses secure auto-configuration of a CPE (Customer-Premises Equipment), and incorporates other CPE
management functions into a common framework. TR-069 uses common transport mechanisms (HTTP and
HTTPS) for communication between CPE and ACS (Auto Configuration Servers). The HTTP(S) messages contain
XML-RPC methods defined in the standard for configuration and management of the CPE.
TR-069 is intended to support a variety of functionalities to manage a collection of CPEs, including the following
primary capabilities:
• Auto-configuration and dynamic service provisioning
• Software or firmware image management
• Status and performance monitoring
• Diagnostics
The following table provides a description of RPC methods supported by IP phones.
RPC Method
GetRPCMethods
SetParameterValues
GetParameterValues
GetParameterNames
GetParameterAttributes
SetParameterAttributes
Reboot
Download
Upload
ScheduleInform
FactoryReset
Matrix SPARSH VP710 User Guide
This method is used to discover the set of methods supported by the
CPE.
This method is used to modify the value of one or more CPE
parameters.
This method is used to obtain the value of one or more CPE
parameters.
This method is used to discover the parameters accessible on a
particular CPE.
This method is used to read the attributes associated with one or
more CPE parameters.
This method is used to modify attributes associated with one or
more CPE parameters.
This method causes the CPE to reboot.
This method is used to cause the CPE to download a specified file
from the designated location.
File types supported by IP phones are:
• Firmware Image
• Configuration File
This method is used to cause the CPE to upload a specified file to the
designated location.
File types supported by IP phones are:
• Configuration File
• Log File
This method is used to request the CPE to schedule a one-time
Inform method call (separate from its periodic Inform method calls)
sometime in the future.
This method resets the CPE to its factory default state.
Description
721