Table of Contents
Advertisement
Description
Default Value
Range
Example
Dual Headset
Parameter-
features.headset_training
Description
Default Value
Range
Example
Audio Codec
Matrix SPARSH VP710 User Guide
Enables or disables headset prior feature.
You need to press the HEADSET key to activate the
headset mode in advance.
0
0-Disabled
1-Enabled
If it is set to 0 (Disabled), the headset mode can be
deactivated by pressing the Speakerphone key or
the HEADSET key except off-hook.
If it is set to 1 (Enabled), the headset mode will not
be deactivated until the user presses the
HEADSET key again.
features.headset_prior = 0
Configuration File
<MAC>.cfg
Enables or disables dual headset feature.
0
0-Disabled
1-Enabled
If it is set to 1 (Enabled), users can use two headsets on
one phone. When the IP phone joins in a call, the users
with the headset connected to the headset jack have a
full-duplex conversation, while the users with the
headset connected to the handset jack are only
allowed to listen to.
features.headset_training = 0
945
Advertisement
Table of Contents
