Table of Contents
Advertisement
To configure LLDP feature via phone user interface:
•
Swipe down from the top of the screen or swipe left/right to go to the second idle screen.
•
Tap Settings->Advanced (default password: admin) ->Network->LLDP.
•
Tap the On radio box in the LLDP Status field.
•
Enter the priority value (1-3600s) in the Packet Interval field.
•
Tap
to save the change or
The phone prompts you to reboot the phone.
•
Tap OK to reboot the phone
The settings will take effect after a reboot
Matrix SPARSH VP710 User Guide
to cancel.
565
Advertisement
Table of Contents
