Table of Contents
Advertisement
Range
Example
VQ-RTCPXR
Parameter-
phone_setting.vq_rtcpxr.session_rep
ort.enable
Description
Default Value
Range
Example
Parameter-
phone_setting.vq_rtcpxr.interval_re
port.enable
Description
Default Value
Range
Example
958
0-Disabled
1-Enabled
Note: It works only if the value of the parameter
"voice.rtcp_xr.enable" is set to 1 (Enabled).
If you change this parameter, the IP phone will reboot
to make the change take effect.
NA
Configuration File
<MAC>.cfg
Enables or disables the IP phone to send a session
quality report to the central report collector at the end
of each call.
0
0-Disabled
1-Enabled
NA
Configuration File
<MAC>.cfg
Enables or disables the IP phone to send an interval
quality report to the central report collector
periodically throughout a call.
0
0-Disabled
1-Enabled
NA
Matrix SPARSH VP710 User Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the SPARSH VP710 and is the answer not in the manual?