Matrix SPARSH VP710 User Manual page 509

Reboot
AutoP
DNDOn
DNDOff
number=xxx&outgoing_uri=y
OFFHOOK
ONHOOK
ANSWER/ASW/Asw
Reset
ATrans=xxx
BTrans=xxx
CALLEND/ CallEnd
CallWaitingOn
CallWaitingOff
AlwaysFwdOn/BusyFwdOn/NoAnswFwdOn=xxx=n
AlwaysFwdOff/BusyFwdOff/NoAnswFwdOff
ASW/CANCEL/HOLD/UNHOLD:xxx
Matrix SPARSH VP710 User Guide
Reboot the phone.
Perform auto provisioning.
Activate the DND feature.
Deactivate the DND feature.
Place a call to xxx from SIP URI y.
Example:
http://10.3.20.10/servlet?key=number=1234&o
utgoing_uri=1006@10.2.1.48 (1234 means the number you
dial out; 1006@10.2.1.48 means the SIP URL you dial from)
Pick up the handset.
Hang up the handset.
Answer the call.
Reset the phone.
Perform a semi-attended/attended transfer to xxx.
Perform a blind transfer to xxx.
End the call.
Activate the call waiting feature
Deactivate the call waiting feature.
Activate an always/busy/no answer forward feature to xxx for
the IP phone ("xxx" means the destination number).
The valid value of "n" means the duration time (seconds)
before forwarding incoming calls (n is the times of 6, e.g., 24). It
is only applicable to no answer forward feature.
Note: It works only if the call forward mode is Phone, the
always/busy/no answer forward feature will apply to all the
accounts on the phone.
Example:
http://10.10.20.10/servlet?key=NoAnswFwdOn=1001=24
Deactivate the always/busy/no answer forward feature for the
IP phone.
Note: It works only if the call forward mode is Phone, the
always/busy/no answer forward feature will apply to all the
accounts on the phone.
Example:
http://10.10.20.10/servlet?key=NoAnswFwdOff
Answer/end/hold/unhold a call (xxx refers to the call-id of the
active call).
Example: http://10.10.20.10/servlet?key=ASW:33093
Note: To get the call-id of the active call, configure the action
URL:
http(s)://<serverIPAddress>/help.xml?CallId=$call_id.
For more information, refer to "Action URL".
501